PA66 103FHS - 东莞市海毅新材料有限公司

产品名称：PA66 103FHS
更新时间：2015.04.08
出品单位：鑫之源
浏览次数：
更多产品图片：

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	450000	203000	psi	ISO 527-2
Tensile Stress (Yield)	12300	7980	psi	ISO 527-2
Tensile Strain (Yield)	4.5	25	%	ISO 527-2
Nominal Tensile Strain at Break	20	> 50	%	ISO 527-2
Flexural Modulus	406000	189000	psi	ISO 178
Films	Dry	Conditioned	Unit	Test Method
Tensile Elongation - MD (Yield)	4.5	--	%	ISO 527-3
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	2.1	1.4	ft·lb/in²
73°F	2.6	5.2	ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	170 ft·lb/in²	No Break
73°F	No Break	No Break
Notched Izod Impact Strength				ISO 180/1A
-40°F	2.6	--	ft·lb/in²
-22°F	2.9	2.4	ft·lb/in²
73°F	2.6	5.2	ft·lb/in²
Unnotched Izod Impact Strength				ISO 180/1U
-22°F	140 ft·lb/in²	No Break
73°F	140 ft·lb/in²	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	392	--	°F	ISO 75-2/B
264 psi, Unannealed	158	--	°F	ISO 75-2/A
Glass Transition Temperature³	140	--	°F	ISO 11357-2
Melting Temperature³	504	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	5.6E-5	--	in/in/°F
Transverse	6.1E-5	--	in/in/°F

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+14	1.0E+11	ohm·cm	IEC 60093
Dielectric Constant				ASTM D150
100 Hz	3.40	--
1 kHz	3.40	--
1 MHz	3.20	--
Dissipation Factor				ASTM D150
100 Hz	1.0E-6	--
1 kHz	1.0E-6	--
1 MHz	2.0E-6	--
Comparative Tracking Index (CTI) (0.118 in)	PLC 0	--		UL 746
Comparative Tracking Index	600	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.0280 in	V-2	--
0.0591 in	V-2	--
Oxygen Index	28	--	%	ISO 4589-2

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.01	--	g/cm³
Specific Heat Capacity of Melt	0.667	--	Btu/lb/°F
Thermal Conductivity of Melt	1.1	--	Btu·in/hr/ft²/°F
Additional Information	Dry	Conditioned	Unit
Effective Thermal Diffusivity	0.0500	--	cSt